Acoustic Research AW772 설치 및 사용 지침 - 페이지 10

{카테고리_이름} Acoustic Research AW772에 대한 설치 및 사용 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Acoustic Research AW772 12 페이지. 900 mhz wireless headphones 150 ft (45 m)

페이지 인쇄

TROUBLESHOOTING

Refer to this troubleshooting section if you encounter any difficulties in

setting up and using your headphones.

PROBLEM

No sound heard

through the

headphones

Poor sound quality

or interference

Power cut off

SOLUTION

A) Check that your audio source, recharging

cradle/transmitter and headphones are

connected, supplied properly and turned on.

B) Check to ensure that the rechargeable

batteries are installed in the headset

correctly and have been recharged properly.

C) Check to ensure the recharging cradle/

transmitter is running and the power

indicator light on the unit is lit.

D) Check that the audio source is delivering

a sufficient signal to the recharging cradle/

transmitter's AUDIO IN input jack.

A) Check to ensure that the sound provided

by the audio source is loud enough and

of sufficient quality.

B) Check if the batteries in the headphones have

sufficient power. Recharge or replace them,

if necessary.

C) Check to see if you have selected the best

transmission channel (1, 2, or 3) to provide

the optimum signal reception. If necessary,

try another channel, remembering to fine-

tune the reception using the tuning control.

D) Check if the distance between the headphones

and the recharging cradle/

transmitter is within the operating range.

(The effective range of this device is up to

150 feet/45 meters from the cradle/

transmitter.)* If out of range, move closer to

the recharging cradle/transmitter to receive

the sound.

E) Check that the audio source provides

stereo sound.

The recharging cradle/transmitter has an

automatic power off function. When no signal

is received for 2 minutes through the recharging

cradle/transmitter's AUDIO IN input jack, it

switches off. Switch on your audio source again,

and use the tuning control to adjust reception. If

necessary, increase the audio source's volume.

* Range may vary by environment.