Alto MS8 소유자 매뉴얼 - 페이지 10
{카테고리_이름} Alto MS8에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alto MS8 19 페이지. Speaker enclosure passive/active models
페이지 인쇄
5. RIGGING
4).Choosing which slot to use there are three slots in each bracket arm. use
the forward slot (as shown)when the cabinet is facing perpendicular to the
bracket mounting surface.
5).Hanging the Cabinet
A.
Place a neoprene gasket on the bracket's lower arm. Center it on the
appropriate slot.
B.
Position the cabinet between the bracket arms.
C.
Align the bracket's top slot to the cabinet's M10 threaded hole.
D.
Holding the cabinet in position, insert the screw through the bracket slot
and into the cabinet's top threaded hole and hand tighten.
Repeat step D through the bottom bracket hole.
E.
F.
Position cabinet and tighten both screws with a 5mm wrench.
8