Alto PS 3 사용자 설명서 - 페이지 10

{카테고리_이름} Alto PS 3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alto PS 3 11 페이지. Passive speaker
Alto PS 3에 대해서도 마찬가지입니다: 사용자 설명서 (6 페이지)

페이지 인쇄
Alto PS 3 사용자 설명서

6. TECHNICAL SPECIFICATIONS

Descriptions
Active System type
LOW - RMS Output Power
HIGH - RMS Output Power
Max SPL at 1m
Frequency Response
Impedance Low - High
Crossover Frequency
Protection Low - High
Low - Frequency
High - Frequency
Horn Coverage H x V
Input Sensitivity
Input Impedance
Connectors
Plastic Reinforced Cabinet
Hardware Suspension
Amplifier Protections
External Control
Power Supply
Dimensions H W D
Net Weight lbs/kg
Gross Weight lbs/kg
Shipping Volume
Descriptions
Passive System type
Continuos Power Handling
Peak Power Rating
Sensitivity at 1W,1mt
Max SPL at 1mt
Frequency Response
Impedance
Crossover Frequency
Low - Frequency
High - Frequency
High Frequency Protection
Dimensions HxWxD
Net Weight lbs/kg
Gross Weight lbs/kg
Shipping
Volume
The AES 2 - 1984 Standard specification by Audio Engineering Society, is representative and commonly used for the measure in
Professional Sound Reinforcement. It is defined as the square of the RMS voltage generated with a pre-defined and band-passed
Pink Noise Signal, applied continuously for 2 hours, on the assembled speaker cabinet.
In this way, the declared power of ALTO passive speaker cabinet, is comparable to the RMS voltage value, measured on the
equivalent power amplifier for the same value of impedance.
PS4HA Active
Bi-Amp. with DSP processor
300Watt RMS Class H
100Watt RMS Class AB
121.5dB SPL calculated
50Hz / 20kHz +/-10dB
Low 4 Ohm - High 8 Ohm
2000Hz - DSP Processor
DSP Lim./ Comp. each sections
12" / 318mm - 2.5" voice coil
Titanium Driver 1.35" Voice Coil
Input with Combo/ Link with XLR
Soft Start - Short Circuit - DC voltage - Thermal Protection
Mic/Line Vol.-Clip-Ground Switch.
23.38kg / 51.54lbs
26.06kg / 57.38lbs
4.83CFT
PS4H Passive
2-way vented box
250Watt AES Standard
500Watt
Peak
97 dB SPL
121 dB SPL Calculated
55Hz / 20kHz +/-10dB
8 Ohm Nominal
2000Hz 12 / 24dB/Oct
12" / 318mm - 2.5" voice coil
Titanium Driver 1.35" Voice Coil
Electronic Dynamic Protection
18.75kg /41.34lbs
22kg / 48.5lbs
4.83CFT
PS4LA Active
Bi-Amp. with analog processor
150W RMS Class AB
50W RMS Class AB
118.5dB SPL calculated
55Hz / 20kHz +/-10dB
Low 4 Ohm - High 8 Ohm
2500Hz
6 / 12dB/Oct.
Analog Limiter / Compressor
12" / 318mm - 2" voice coil
Aluminum Driver 1" Voice Coil
90 H x45 V
Line + 4dB / 1.23 V
30k Balanced -15k Unbalanced
Input with Jack / Link with XLR
Trapezoidal & Monitor shape
Six suspension point
Volume- Clip - Ground Switch
230Volt / 115Volt
660mm
396mm
384mm (26"
19.40kg / 42.76lbs
22.05kg / 48.61lbs
4.83CFT
PS4L Passive
2-way vented box
180Watt AES Standard
360Watt Peak
96 dB SPL
118.5 dB SPL Calculated
60Hz / 20kHz +/-10dB
8 Ohm Nominal
2250Hz 6 / 12dB/Oct
12" / 318mm - 2" voice coil
Driver 1" Voice Coil
Electronic Dynamic Protection
660mm x396mmx 384mm (26" x15.6" x15.1")
17.12kg / 37.74lbs
22kg / 48.5lbs
4.83CFT
9
PS3A Active
Bi-Amp. with analog processor
70W RMS Class AB
50W RMS Class AB
115.5dB SPL calculated
60Hz / 20kHz +/-10dB
Low 4 Ohm - High 8 Ohm
3000Hz 6 / 12dB/Oct.
Analog Limiter / Compressor
12" / 318mm - 2" voice coil
Aluminum Driver 1" Voice Coil
Input with Jack / Link with XLR
Volume- Clip - Ground Switch
50 / 60Hz
15.6"
15.1")
19.2kg / 42.32lbs
21.85kg / 47.17lbs
4.83CFT
PS3 Passive
2-way vented box
120Watt AES Standard
240Watt Peak
95 dB SPL
115 dB SPL Calculated
65Hz / 20kHz +/-10dB
8 Ohm Nominal
3000Hz 6 / 12dB/Oct
12" / 318mm - 2" voice coil
Driver 1" Voice Coil
Electronic Dynamic Protection
17.3kg / 38.13lbs
19.95kg / 43.98lbs
4.83CFT