Diverite HunterPac BCD 사용자 설명서 - 페이지 14
{카테고리_이름} Diverite HunterPac BCD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Diverite HunterPac BCD 20 페이지.
페이지 인쇄HunterPac BCD
Care and Maintenance
With proper care and service, your HunterPac can provide you with years of
safe, enjoyable use. Without proper care, your HunterPac system can become
damaged and be either unserviceable or dangerous to use.
Note: Stainless steel can develop rust even when properly cared for.
General Maintenance Procedures
The sun's ultraviolet rays can fade and damage the HunterPac, shortening
o
its life. Store the HunterPac away from sunlight and excessive heat.
Although the HunterPac is designed for use in water as cold as 28 F (-2 C)
and as warm as 104 F (40 C), Dive Rite recommends storing the HunterPac
between 0 and 104 F (-18 to 40 C).
Keep sharp objects from coming in contact with the HunterPac.
o
Take care when handling the HunterPac. Do not rest heavy objects on the
o
BC or drag it over rough surfaces.
Periodically lubricate the low-pressure inflator hose coupling and quick
o
disconnect plug with silicone lubricant.
Due to the type of material used in the construction of the HunterPac,
o
clean it only with fresh water and mild detergent. Chemicals, strong
detergents, and cleaning solutions can damage the HunterPac and shorten
its life.
Have the HunterPac inspected yearly by your local, authorized Dive Rite
o
dealer.
Avoid excessive pool use. Excessive use in chlorinated water can lead to
o
premature discoloration and shorten the products' life.
Rinse the HunterPac thoroughly after each use and allow it to dry
o
completely before storing. Dive Rite recommends Salt-X for salt removal
(www.salt-x.com).
WARNING: Do not disconnect the large-diameter inflation hose elbow/remote
exhaust from the BC body. Detaching and re-attaching this component should
only be attempted by a qualified technician working under the supervision of
an authorized Dive Rite dealer or distributor. Attempts to remove and/or
12
www.diverite.com