Alto SPIN 43 DS 사용 설명서 - 페이지 8

{카테고리_이름} Alto SPIN 43 DS에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alto SPIN 43 DS 16 페이지. Single-disc machine

페이지 인쇄
Alto SPIN 43 DS 사용 설명서
4 Control/Operation
4.1

Electrical connections

4.2

Using accessories

2
1
3
4
5
CAUTION!
Connect the cleaner to a proper
electrical installation only.
Follow safety instructions in
Chapter 1.
1. Plug the cleaner into a
socket.
1. Place the accessory (brush
or drive plate with pad) on
the floor.
2. Tip the cleaner on to its
wheels and push it over
accessory until the drive star
and the brush flange are
vertically aligned.
3. Lower the cleaner on to the
accessory.
4. Pull the shaft adjustment
lever (1) and lower the shaft
into its cleaning position.
NOTE!
Extend both arms loosely
downwards (2). Always guide
the cleaner with both hands on
the handle (3).
5. Align the cleaner horizontally
on the accessory.
NOTE!
When using the SPIN 43 DS,
use low speed to fit the
accessory.
6. Press the switch lock (4) and
briefly press the brush motor
switch (5). The brush motor
runs and the accessory
automatically engages.
21