Alto 30C/CA COMPACT I 사용 설명서 - 페이지 9

{카테고리_이름} Alto 30C/CA COMPACT I에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alto 30C/CA COMPACT I 18 페이지.

3.3 Operation

Activate the high pressure washer by releasing the trigger of the spray handle (1). When the cleaner is not

in use, secure the spray handle by turning the safety knob (2) into pos. 0.

NOTE: Machines without automatic start/stop (30C). Never allow the machine to run for more than 5

min. upon release of the trigger (only 3 min. if the temperature of the inlet water exceeds 50°C).

The spray lance features 2 nozzles, a high pressure nozzle and a low pressure nozzle.

When the pressure reducing valve (1) is completely closed (turned clockwise - B), only the high pressure

nozzle is used - high pressure mode.

When the pressure reducing valve is quite open (turned counter clockwise - A) both spray lances are used

- low pressure mode / addition of detergents. The pressure is infinitely variable between these positions.

Stop the machine by turning the start/stop button (1) to position O. Unplug. Turn off the water supply and

activate the spray handle to relieve the high pressure hose of pressure. Dismount the high pressure hose

and the water inlet hose.

NOTE: Machines with automatic start/stop (30CA). When the spray handle is released, the machine will

automatically stop. The machine can be restarted just by activating the spray handle.

If the motor protection system engages, the machine should be restarted by turning the start/stop button to

position O. (See section "7.0 Trouble shooting and correction")

Operating instructions

Always hold the spray lance with both

hands!

Always lock the spray handle when the

cleaner is not in operation.

Turn pressure reducing valve:

Clockwise (B): high pressure

Counter clockwise (A): low pressure /

addition of detergents

Turn start/stop button (1) to position O.