Alto 30HA STANDARD/MASTER 소유자 매뉴얼 - 페이지 9
{카테고리_이름} Alto 30HA STANDARD/MASTER에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alto 30HA STANDARD/MASTER 19 페이지. Alto-shaam inc. pressure washer user manual
페이지 인쇄3.0 Operating instructions
3.1 Connections
1.
High pressure hose
The high pressure hose with imprinted max. working pressure and temperature (150°C) should be attached
to outlet socket (1) using the quick coupler (6). The total length of the high pressure hose must not exceed
66 ft.
2.
Inlet water connection
Let water run through the inlet hose to flush any impurities, and clean coupling parts before connecting the
supply hose. Attach the inlet water hose to the quick coupling part (2) of the water inlet.
The water supply system must supply at least. 200 gal/hr (3.2 gpm).
If there is a risk of sand in the inlet water (i.e. from your own well), a sand filter should be mounted. Please
contact your ALTO distributor for further information.
3.
Power connection
Uncoil the power cord before running the machine.
Check voltage, fuse, cords and extension cords according to section »2.1. Start-up«.
Only use KEW Technology high pres-
sure steam-capable hoses with an
imprinted max. temperature of 150°C.
Max. length of extension hose: 33 ft.
Min. length/i.d. of hose: 20 ft, ½".
Clean water inlet screen at least monthly
Max. inlet water pressure 150 psi.
Only connect to an approved receptacle
with grounding conductor.
7