diversey QFM 설치 및 설정 매뉴얼 - 페이지 4

{카테고리_이름} diversey QFM에 대한 설치 및 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. diversey QFM 11 페이지.

QFM

Remove cover and then the wishbone from backplate towers. (Fig 1.2).

Press the clip on the backplate inwards to release the proportioner from the backplate. Lift the proportioner out of

the mounting plate, and remove it from the enclosure (Fig 1.3).

Position the QFM vertically on the wall and drill three holes for either the horizontal mounting slots or the

keyholes. Use the horizontal mounting slots for hard-plumbed installations as they allow the unit to slide 25mm

from side to side when connecting or disconnecting from the water fitting. Use the keyholes when using a flexible

water supply line. (Fig 1.4)

Connect water supply. If necessary, swap the water inlet from the right side to the left as follows:

NOTE: Water supply should have an isolating valve in close proximity to the unit.

Fig 1.2

Clip

Fig. 1.3

Fig 1.4

Page 4 of 11

Installation & Setup Guide

DE1548 INT issB s1 July 2012