Alto aero series 운영자 매뉴얼 - 페이지 10

{카테고리_이름} Alto aero series에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alto aero series 20 페이지. Wap technology

Problem

Motor does not start.

Reduced suction power.

No suction power during

wet cleaning.

Page

-10-

TROUBLESHOOTING

Cause

1. The fuse or plug socket has blown.

2. Overload protection switch has tripped.

1. Bag-type filter full.

2. Suction hose clogged.

3. Filter element clogged.

1. Tank full (float switch closing off the

suction opening).

NOTES

WAP TECHNOLOGY Wet/Dry Vacuums Operator's Manual

Action

1. Reset the fuse

2. Allow the machine to cool down approximately

5 minutes; if the machine does not start again

automatically, contact the Service Dept.

1. Replace bag-type filter.

2. Clean suction hose.

3. Clean and replace filter element.

1. Empty tank.