Alto X23SW 사용자 설명서 - 페이지 8

{카테고리_이름} Alto X23SW에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alto X23SW 10 페이지. 2-way stereo crossover plus subwoofer
Alto X23SW에 대해서도 마찬가지입니다: 사용자 설명서 (11 페이지)

페이지 인쇄

1. Audio Connection

4.3. Rack Mounting

The most secure mounting is on a universal rack shelf available from various rack manufactures or your

music dealer. The X23SW Active Crossover fits into one standard 19" rack unit of space. Please allow at

least an additional 4" depth for the connectors on the rear panel. Be sure that there is enough air space

around the unit for sufficient ventilation and please do not place the X23SW Active Crossover on high

tem

perature

devices such as power amplifiers etc. to avoid overheating.

5. APPLICATION

5.1 X23SW 2-Way Stereo

Present your X23SW Active Crossover in a 2-way stereo application, please connect the unit in your

system as the following illustration step by step:

1. Plug the Left line-in into INPUT 1 and the Right line-in into INPUT 2.

2. Connect the LOW OUT 1 to the Left input of the Low frequency amplifier, and the LOW OUT 2 to the

Right input of the Low frequency amplifier.

3. Connect the HIGH OUT 1 to the Left input of the High frequency amplifier, and the HIGH OUT 2 to the

Right input of the High frequency amplifier.

4. Connect the SUB woofer OUTPUT TO the subwoofer amplifier via this unbalanced 1/4" output jack.

TYPICAL SET-UP

220-240V

HIGH AMP

AC INPUT

95-120V /210-240V 60-50Hz

Rated Power Consumption 6W

FUSE:

210-240V: T100mAL 250VAC

95-120V: 200mA 250VAC

REPLACE FUSE WITH CORRECT

TYPE ONLY

HIGH OUT 2

LOW AMP

SUB AMP

CHANNEL 2

NEW

TIDE

LOW OUT 2

INPUT 2(UNBALANCED)

INPUT 2(BALANCED)

WOOFER

SUB

HIGH OUT 1

LOW OUT 1

INPUT 1(UNBALANCED)

NEW

TIDE

INPUT 1(BALANCED)