Alto X40 사용자 설명서 - 페이지 7

{카테고리_이름} Alto X40에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alto X40 13 페이지. 4-way stereo active crossover

The fuse-holder above the AC connector on the rear of the chassis has 3 triangular markers (please refer to the

above pictures), with two of these triangles opposing each other, your unit is set to the operating Voltage printed

next to these markers.

Inputs & Outputs

The inputs and outputs are all floating and balanced when they are linked to other floating and balanced equipment.

Each kind of combination of balanced and unbalanced operation is acceptable.

CD Boost

Abbreviation for 'Constant Directivity Boost', this button can be used to boost the high frequencies by +3dB at

3.5kHz, then +6dB per octave till 22.5kHz.

Through this function and using with the horns, power loss of the high frequencies can be compensated for

during the long distance transmission in the large PA reinforcement systems.

Phase nversion

These buttons will reverse the phase of the corresponding frequencies output by 180 , so that, the frequencies

cancellation in some fields can be compensated for.

110-120V

220-240V

THIS IS SET FOR

110V AC TO 120V

AC OPERATION

220-240V

110-120V

THIS IS SET FOR

220V AC TO 240V

AC OPERATION