Alto LYNX-MIX82FX 사용자 설명서 - 페이지 14
{카테고리_이름} Alto LYNX-MIX82FX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alto LYNX-MIX82FX 20 페이지. 8-channel mixing console with digital effects
![Alto LYNX-MIX82FX 사용자 설명서](/uploads/products/server2/813901/813901.jpg)
5. INSTALLATION AND CONNECTION
2=Hot(+)
3=Cold(-)
Use for Balanced Mic Inputs
(For unbalanced use, connect pin 1 to 3)
3-pin XLR Male Plug
(seen from soldering side)
6. APPENDIX
PREFADER AND POSTFADER CONSIDERATIONS
Interesting consideration! Where are the faders in your
Actually a fader is usually regarded as a slider, that is a linear potentiometer. All
potentiometers in your
fader/post-fader description that is quite industry standard and easily
understandable. When your
bus of all input channels is wired post-fader. In this way, the Aux bus can be
used for the internal or external multi-effect. If you want to use the
MIX82(FX)
Aux bus for powered stage monitors, you should disconnect the above-
indicated POST route track and solder the PRE route track like in this drawing. In
this way, the signal is routed to the AUX SENDS output before the Channel
Level control.
AUX
(PRE)
POST
Before
12
2
1
1=Ground/Screen
3
L YNX-MIX82(FX)
L YNX-MIX82(FX)
Disconnect
the POST route
2
1
2=Hot(+)
3
3=Cold(-)
Use for Main output
(For unbalanced use, leave pin3 unconnected)
3-pin XLR Line Socket
(seen from soldering side)
are of rotary type but we keep the pre-
leaves the Alto Factory, the AUX
AUX
(PRE)
POST
After
1=Ground/Screen
L YNX-MIX82(FX)
??
L YNX-
Solder the
PRE route