Acoustic Research AW-871 설치 및 운영 매뉴얼 - 페이지 7

{카테고리_이름} Acoustic Research AW-871에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acoustic Research AW-871 12 페이지. 900mhz wireless stereo speakers
Acoustic Research AW-871에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (15 페이지)

페이지 인쇄

IV. Tuning the Speakers

Tuning indicator light (tuned)

Standby/Charging indicator

light (stdby/chrg)

Power/volume/scan control

1. Push the power/volume/scan controls (C) to turn each speaker ON. The

standby/charging indicators (B) will illuminate red while the speakers are

tuning to the transmitter. The "tuned" indicators (A) will illuminate blue,

indicating that the speakers are tuned to the transmitter, and you should

hear sound coming from the speakers.

Note: Once the speakers have tuned to the transmitter and the blue

"tuned" indicators are on, the red "standby/charging" indicators will turn off.

2. Adjust volume on each speaker as desired.

3. For stereo operation, set the left/mono/right switch (F) to "left" on the

speaker located to the left of the listener, and set the other speaker to

"right" position. Set each speaker to "mono" for the best audio quality, if

you plan on using one speaker in a different room from the other.

4. The speaker will automatically retune if it loses the signal from the

transmitter. However, you can also push the power/volume/scan control to

retune the speaker at any time. While the speaker is tuning, the blue

"tuned" indicator will turn off and the red "standby/charging" light will be

lit. After locking onto the transmitter signal, the blue "tuned" indicator will

come back on and the red "standby/charging" indicator light will turn off.

Note: Interference in the form of static and/or distortion can sometimes

be heard. If this occurs, confirm the transmitter/speaker adjustments and

indicators. If the problem persists, refer to the Troubleshooting section

of this manual.

Left/mono/right switch