Acoustic Research AW822 설치 및 운영 매뉴얼 - 페이지 13

{카테고리_이름} Acoustic Research AW822에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acoustic Research AW822 13 페이지. Wireless indoor/outdoor speaker with auto-tuning

페이지 인쇄

1. Connecting the Speaker System

Addendum to the Installation Manual

Accessing the Speaker Battery Compartment

There are two options to power your wireless speaker: using the included AC power

adapter or using 8 C-cell batteries (not included). The Installation and Operation

Manual takes you through the steps to do both on page 5.

The Installation and Operation Manual does not include instructions for accessing

the battery compartment on the speaker.

Speaker Bottom

Cover

Screws

Speaker Battery

Compartment Cover

To replace the speaker battery compartment cover:

1. Put the battery compartment back in place.

2. Put the screws back in the holes on the battery compartment cover. Use a

Phillips-head screwdriver to tighten the compartment cover screws.

To remove the speaker battery compartment

cover:

1. Lay the speaker gently on its top.

2. Use a Phillips-head screwdriver to loosen

the compartment cover screws.

3. Hold the battery compartment cover and

turn the speaker over. The screws should

fall out. If they don't, lay the speaker on

its top again and loosen the screws a little

more.

Important: Don't lose the screws! You'll

need them to put the battery compartment

cover back on.

4. Put the speaker on its top again. Remove

the battery compartment cover.

5. Insert eight (8) C-cell batteries (not

included) in the speaker following the

polarity (+ and –) diagram inside the

compartment.

AW822_TIS2_00