Alto Professional ZEPHYR ZMX52 매뉴얼 - 페이지 5
{카테고리_이름} Alto Professional ZEPHYR ZMX52에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alto Professional ZEPHYR ZMX52 8 페이지.
페이지 인쇄
5
GAIN – Adjusts the channel audio level (pre-fader
and pre-EQ gain). Adjust this so that the PEAK LED
just barely lights up during the loudest parts of the
music
6
HI EQ (TREBLE)
Adjusts the high (treble)
treble frequencies of the channel.
7
LO EQ (BASS) – Adjusts the low (bass)
frequencies of the channel.
8
CHANNEL PAN Adjusts the (mono) channel's
position in the stereo field.
9
BALANCE (CH 2/3 & 4/5) – Adjusts the balance
between Channels 2 and 3 and Channels 4 and 5.
10
PEAK LED
This LED will flash if the signal is
clipping. If this happens, decrease the setting of the
5
GAIN
or the CHANNEL VOLUME
11
CHANNEL VOLUME
Adjusts the audio level on the channel.
20
11
•
5
6
7
8
11
* When using LINE INPUTS
If only the left channel is used, the signal
will be heard in both left and right
channels and the balance will not be
adjustable.
•
If only the right channel is used, the signal
will be heard in the right channel only.
9
10
11
11
9
10
10
11
2/3 an d 4/5: