Alto Professional ZMX164FXUSB 빠른 시작 매뉴얼 - 페이지 8

{카테고리_이름} Alto Professional ZMX164FXUSB에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alto Professional ZMX164FXUSB 8 페이지.

페이지 인쇄

TECHNICAL SPECIFICATIONS

MONO INPUT CHANNELS

• Microphone inputs: Electronically balanced, discrete input configuration)

• Frequency response: 20Hz to 20kHz, +/-1dB

• THD+N: ＜0.03% at 0dBu, 1kHz

• Gain range: 0 dB to 50 dB (MIC)

• SNR (Signal to Noise Ratio): 114 dB

LINE INPUTS

• Electronically balanced

• Frequency response: 20Hz to 20kHz, +/-1dB

• THD+N: ＜0.03% at 0dBu, 1kHz

• Sensitivity range: -15 dBu to 35 dBu

IMPEDANCES

• Microphone inputs: 1.4 kΩ

• Channel insert return: 2.5 kΩ

• All other inputs: > 10 kΩ

• 2-Track outputs: 1 kΩ

• All other outputs: 120 Ω

EQUALIZATION

• High-shelving: ±15 dB @ 12 kHz

• Mid bell (mono): ±12 dB (frequency range 100 Hz ~ 8 kHz)

• Low-shelving: ±15 dB @ 80 Hz

• Main EQ: 9 EQ bands (63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 16kHz)±15 dB

DSP SECTION

• A/D & D/A converters: 24-bit

• DSP Resolution: 24-bit

• Effects: Large Hall, Medium Hall, Large Room, Medium Room, Karaoke, Short Spring

Reverb, Long Spring Reverb, Chamber, Mono Delay, Mono Echo, Stereo Echo, Flanger,

Chorus, Reverb + Chorus, Reverb + Delay, Thickener

• Presets: 16

• Controls: 16-position preset selector, 16-position variation selector, DSP mute switch, peak

LED indicator

MAIN MIX

• Noise (bus noise): Fader 0 dB, channels muted: -90 dBr (ref: +4 dBu) Fader 0 dB, all input

channels assigned & set to unity gain: -88 dBr (ref: +4 dBu)

• Phantom Power: Mic Pin2/Pin3 and Pin1 47±2V

POWER SUPPLY

• Main voltage: USA/Canada: 100-120 VAC ~ 60 Hz, UK/Australia: 240 VAC ~ 50 Hz, Europe:

210-240 VAC ~ 50 Hz

• Power consumption: 70 W

• Fuse: T1.6 AL

• Main connection: Standard IEC receptacle

DIMENSIONS (W x D x H)

• 525 mm x 400 mm x 115 mm; (20.6" x 15.7" x 4.5")

WEIGHT

• 7.40 Kg (16.3 lb)

* Specifications are subject to change without notice.