CameraFTP NVR-MT1003 매뉴얼 - 페이지 4

{카테고리_이름} CameraFTP NVR-MT1003에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CameraFTP NVR-MT1003 15 페이지.

Overview of Cloud NVR-MT1003

Cloud NVR-MT1003 Bundled Solution

Windows tablet running CameraFTP VSS software, three D-Link DCS-932L / 934L (one of the most

popular IP camera models) and one TP-Link Wireless-N 300Mbps Access Point with CameraFTP's Cloud

surveillance and storage service.

The cameras are pre-configured to connect with the tablet via the Wireless AP. The VSS software on the

tablet encodes the video stream into H.264-based video clips and uploads them to CameraFTP cloud.

The bundled cameras and cloud service plan are carefully chosen to strike a balance among video

quality, bandwidth usage, hardware cost and service price. It does not offer top quality video / image

resolution (which could make your Internet connection painfully slow). At 640x480, it is more than

sufficient for monitoring your front door, living room, garage, drive way or backyard. The advantage is it

uses less than 160Kbps of upload bandwidth per camera at peak time. The average bandwidth is

significantly smaller. Therefore, it is unlikely to affect your Internet connection speed even if you use

slow ADSL. Many other cameras require much more bandwidth, and if you have multiple such cameras,

they will compete for bandwidth with your other devices, resulting slow and unreliable connection.

By default, our Bundled Solution

motion detection turned on. For longer retention days, please contact CameraFTP support.

Since it is a pre-configured solution, it works out of the box. Please note that Broadband Internet

Connection is required.



Power on the TP-Link Wireless AP and connect it with your Internet router (such as your

broadband modem or wireless AP) using the included Ethernet cable. Please see the diagram

below:

is an all-inclusive Cloud NVR & CCTV solution. It integrates a

offers unlimited cloud storage for storing up to 7-days of footage with