Balt 89786 조립 지침 매뉴얼 - 페이지 3

{카테고리_이름} Balt 89786에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Balt 89786 8 페이지. Diversity stand. adjustable height presentation center

Diversity Stand

Assembly Diagram

EAD

HROUGH

NSTRUCTIONS FROM BEGINNING

BEFORE

TO END

STARTING TO ASSEMBLE UNIT

We recommend that you assemble this unit on a table.

1.)

Identify and Separate all the Parts and

Hardware.

Place the Shelf Platform (P7) with the insert

2.)

nuts facing up. Attach 1 each Left Leg

Receiver (P5) and 1 each Right Leg Re-

ceiver (P6) using 4 each (A) screws.

3.)

Attach 1 each Back Panel (P8) using 3

each (A) screws as shown in illustration #1.

(Finger tighten only)

(A) Screw M6 X 1/2"

For Scale only

Illustration # 2

(B) Square Nut M6

For Scale only

4.)

Attach 4 Locking casters (D) in the

front and back as shown in illustra-

tion #1. Tighten the Casters using

Caster Wrench (K).

5.)

Attach Bottom Panel (P9) between

the Left Leg Receiver (P5) and Right

Leg Receiver (P6) using 7 Screws

(A) and 7 Square Nuts (B) as shown

in illustration #2.

Do not use unless all screws are tight. At least

every six months, check all screws to be sure

they are tight. If parts are missing, broken,

damaged, or worn, stop use of the product

until repairs are made by your dealer using

P-7

Illustration # 1

factory authorized parts.