Balt BLT-27502 조립 지침 매뉴얼 - 페이지 3
{카테고리_이름} Balt BLT-27502에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Balt BLT-27502 7 페이지. Fax stand with paper storage
페이지 인쇄
BLT-27502
Tools required:
Phillips Head Screwdriver
To Assemble:
1.
I
dentify and Separate all the Parts and Hardware.
2.
Place the Left Side Panel (P-1) and the
Right Side Panel (P-2) with the Predrilled
holes facing up and install 2 Cam Locks
(F) into the large holes in each Panel as
shown in illustration # 1.
(F) CamLock
For Scale only
3.
Place the Top Panel (P-4) with the Holes facing up. Attach 1 Magnetic
Door Catch (C) to the Top Panel (P-4) using 4 each Wood Screws
(A4) as shown in illustration # 2.
Install 4 each Cam Posts (G) in the 4 threaded insert nuts
4.
(Pre-installed) as shown in illustration # 2.
5.
Install 4 each Wood Dowels (J) into the drilled holes
as shown in illustration # 2.
P-4
Illustration # 2
Assembly Diagram
G
A4
C
F
P-1
Be sure that arrow on
top of Camlock (F)
aligns with centerline of
Edge Drilled hole.
G
J
3
Illustration # 1
F
Phillips
Screwdriver
Arrow
Centerline of Edge
Drilled hole.
(A4) Screw #4 X 5/8"
For Scale only
(G)Cam Post
For Scale only
(J) Wood Dowel
For Scale only