Balt Role Model 89821 조립 지침 매뉴얼 - 페이지 5

{카테고리_이름} Balt Role Model 89821에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Balt Role Model 89821 14 페이지. Portable av center

Place the Right Side Panel (P-2) with the Predrilled holes facing up. Attach 1 Keyboard Slide

(B) to right Side Panel (P-2) and secure using 2 Wood Screws (A3) as shown in illustration # 2.

(See Slide Detail on Page 3)

Install 3 each Cam Posts (E) in the threaded insert nuts (Pre-installed)

as shown in illustration # 1.

Install 4 each Wood Dowels (F) in the

4 Holes as shown in illustration # 2.

10.

Install 2 Cam Locks (D) into the

2 large holes as shown

in illustration # 2.

11.

Separate parts of Door Hinge(G) by loosening Screw

(G3) as shown in Door Hinge Detail. Attach 2 each (G1) to

the right Side Panel (P-1) using 4 screws (A3)as shown in

illustration # 2.

12.

Place the Front Door (P-6) with the 4 Screw Holes facing

up and insert 1 Lock (K) into the large hole as shown in

illustration # 3. Press Lock Ring (K1) over protruding end

of Door Lock (K) as shown in illustration #3. Secure using

Wood Screws (A8)

Attach 2 each (G2) to the Front Door (P-6) using

13.

2 each (G4) and 4 screws (A3) as

shown in illustration # 3.

Do not Tighten all the way.

14.

Attach Metal Door

Knob (N) to Front

Door (P-6) using 1

screw (A5).

15.

Attach 1 Metal

Strike Plate (M1) to

Front Door (P-6)

using 1 screw (A7).

as shown in illustration # 3.

Illustration # 3

Illustration # 2

Door Hinge(G) Detail