Balt 27588 조립 지침 - 페이지 4

{카테고리_이름} Balt 27588에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Balt 27588 4 페이지.

5.)

Insert the Main Platform (P3) onto the Pole (P2) and

slide it down to the desired position. Tighten in

place by clamping down the lock lever as shown in

Illustration #4.

6.)

Insert the Side Platform & Pull Out Shelf (P4) onto

the Pole (P2) and slide down to the desired

position. Tighten in place by clamping down the

lock lever. See illustration #4.

Insert the Side Platform (P5) onto the Pole (P2) and slide

7.)

down to the desired position. Tighten in place by

clamping down the lock lever. See illustration #4.

8.) Use the Straps (E) through the slots in the Side Platform (P5)

and the Side Platform & Pull Out Shelf (P4) to secure

your equipment in place. (See Illustration #5)

Illustration # 5

9.) Snap-on three Cable Ties (F) onto the Pole (P2) to help with wire management as shown in

illustration #5.

4.) Attach the Book Stop (H) to the top front edge of

the Main Platform (P3) using three Book Stop

Screws (G) from underneath as shown in

illustration #3.

Illustration # 3

Clamp Lever

Illustration # 4

27588_07-25-12