Balt 23701 조립 지침 - 페이지 2

{카테고리_이름} Balt 23701에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Balt 23701 5 페이지. Dual laser printer stand

페이지 인쇄

Parts List

Part

Drawing

Top Panel

P-1

Leg Assembly

P-2

Back Stability Panel

P-3

Bottom Stability Panel

P-4

Middle Shelf

P-5

To Assemble:

(For convenience Printer Platforms may be installed with unit turned up-side-down.)

1.) Identify and Separate all the Parts and Hardware.

2.) Attach Bottom Stability Panel (P-4) to 2 Leg Assemblies (P-2) using 4 Screws (A) and

4 Interior Threaded Posts (B).

3.) Attach Back Stability Panel (P-3) to the 2 Leg Assemblies (P-2) using 4 Screws (A) and

4 Interior Threaded Posts (B).

4.) Attach Top Printer Platform (P-1) to the 2 Leg Assemblies (P-2) using 4 Screws (A).

5.) Attach Middle Shelf (P-5) to the 2 Leg Assemblies (P-2) using 4 Screws (A).

6.) Attach 4 Leveling Feet (C) or Casters to the Leg assemblies. [If casters, 2 Locking

casters (D) in the front, and 2 casters (E) in the back. Tighten the casters using Caster

wrench (G).

7.) Tighten all the screws securly using the Allen wrench.

Do not use unless all screws are tight. At least every six months, check all screws to be sure they are

tight. If parts are missing, broken, damaged, or worn, stop use of the product until repairs are made

Dual Laser Printer Stand 23701

Description

Important Information:

by your dealer using factory authorized parts.

Drawing

Qty

1 EA

2 EA

1 EA

Hardware List

Description

Flat Head Screw

Interior Threaded Post

Leveling Feet

2" Locking Casters (for Front)

2" Casters(for Back)

Allen Wrench

Caster Wrench

Cable Clips

Qty

16 EA

8 EA

4 EA

2 EA

1 EA

4 EA