Balt 46572 HI-HILO-3 조립 지침 매뉴얼 - 페이지 4

{카테고리_이름} Balt 46572 HI-HILO-3에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Balt 46572 HI-HILO-3 7 페이지. Adjustable pneumatic workstation

#46572 HI-HILO-3

2. Place the Bottom Shelf (P-6)

with the insert nuts facing up

and attach Base frame (P-7)

using 4 (2-3/8") Flat Head

screws (B).

(Do not tighten screws all the way)

3. Attach Cylinder Receiver (P-8)

to the Base frame (P-7) and the

Bottom Shelf (P-6) using

4 (2-3/8") Flat Head screws

(B) and 4 Interior Threaded

Posts (C) as shown in

illustration # 1.

Illustration # 2

P-7

P-6

P-10

P-9

Illustration # 1 - Base Assembly

4. Attach Casters to the Base Frame

(P-7). 2 Locking casters (D) in the

front and 2 Casters (E) in the back.

Tighten Casters using Caster

Wrench (H).

5. Attach (2) each CPU Rods (P-10)

to the Right side or Left side of the

Base frame (P-7) as shown in

illustration #2.

6. Secure each CPU Rod (P-10) with (2)

each Hex nuts (Q), (2) each Flat

Washers (N), and (1) each Black

Plastic Spacer (P).

7. Slide CPU Sleeve (P-9) over ends of

CPU Rods (P-10) as shown in

illustration # 2.

P-8

P-7