Baltech VP-3410 운영 매뉴얼 - 페이지 3
{카테고리_이름} Baltech VP-3410에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baltech VP-3410 12 페이지. Vibration meter
Baltech VP-3410에 대해서도 마찬가지입니다: 운영 매뉴얼 (16 페이지)
페이지 인쇄DEVICE DESCRIPTION
1.1 Application
The vibration meter BALTECH VP-3410 is designed to
perform vibration monitoring of a wide range of machines
for the purpose of checking their technical condition.
The vibration meter is a simple, portable measurement
device, which allows to perform the following tasks:
- measurement of vibration acceleration in two frequency
bands;
- measurement of RMS vibration velocity and vibration
displacement within the range from 10 to 1000 Hz.
1.2 Design and principle of operation
The vibration meter BALTECH VP-3410 consists of electronic
unit and piezo sensor. The piezo sensor is connected to the
device via cable. Sensor type: piezoelectric acceleration
sensor.
The device housing is made of ABS plastic and has one
sensor input, screen, which displays measurements and
current settings. Measurement and setting control is
performed with a film keyboard. Battery is inside the housing
in a battery cabinet.
During the measurement procedure the sensor is connected
to the device, via cable and is pressed by probe or mounted
on a measurement object with magnet or pin.
1. Electronic unit
2. Piezo sensor