Akitio Taurus Super-S LCM 사용자 설명서 - 페이지 4
{카테고리_이름} Akitio Taurus Super-S LCM에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Akitio Taurus Super-S LCM 17 페이지. Dual-bay raid storage enclosure for two 3.5-inch serial ata hard drives
페이지 인쇄
Taurus Super-S LCM
1.5 Detailed View
1.5.1 Front View
LED/Button
• Power button; blue = power on
• Green = Data access (read/write)
HDD1/2
• Red = Error or empty drive bay
• OFF = HDD status normal
Rebuild
• Yellow = Rebuilding data
Select
• Select setup menu or mode
OK
• Confirm current option or enter setup menu
1.5.2 Rear View
RAID Switch
RAID mode can be set via LCD display
Switch position: 1 up, 2 down
RAID mode is locked according to LCD setup
Switch position: 1 up, 2 up
RAID 1 (not possible to set RAID mode via LCD)
Switch position: 1 down, 2 up
RAID 0 (not possible to set RAID mode via LCD)
Switch position: 1 down, 2 down
To turn on the device, press and hold the
power button for 1 second and then let go.
To turn it off, press and hold the power
button for 3 seconds and then let it go again.
Wait at least 5 seconds after turning off the
power, before turning it back on, or otherwise
it will not work.
Status
= Security lock slot
= Power receptacle
eSATA = External SATA port
FW800 = FireWire 800 port
FW400 = FireWire 400 port
USB 2.0 = USB 2.0 High Speed port
RAID Mode
[2]
Introduction