DIVIMATH HDZero 사용자 설명서 - 페이지 11

{카테고리_이름} DIVIMATH HDZero에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DIVIMATH HDZero 17 페이지.
DIVIMATH HDZero에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지)

Image Settings

The HDZero goggle has an image processor to fine tune video before feeding to DVR and display. It

includes:

Brightness

Saturation

Contrast

For OLED display, you may set OLED brightness to the desired level. Note that the OLED brightness

setting applies to the OLED display only.

If the HDZero goggle detects no movement or no key input for programmed time (3/5/7 minutes), it will

dim the OLED display as an alarm, and it will wait for another one minute before turning off both the

display and HDZero digital receiver with a short beep. The OLED display and HDZero receiver will resume

normal operation if the goggle detects movement or any key input. This feature can be disabled by

setting the waiting time to "Never".

The HDZero goggles integrates a DVR for both the HDZero digital receiver and analog input. These are

the DVR options:

Automatic Record: DVR will start to record when it detects there is valid HDZero RF on the

current channel, and stops recording when the signal is no longer detected. Note that automatic

recording is not available for the analog input, you will need to click Func button to start/stop

recording.

Manual Record: DVR will start/stop only if Func button is clicked.

MP4 format or TS format: MP4 format is better supported by many video editing applications.

However, MP4 files can be corrupted if the goggle loses power before the file is closed after

recording, which can happen if the goggle runs out of battery or the power cord is unplugged

unexpectedly. Unlike the MP4 format, the TS format saves the stream instantly to DVR without

any risk of corrupted files, even if the goggle suddenly loses power.

H264/H265. The DVR must use the H264 format when recording 90fps video (it records in

1280x720x90 for better quality). It uses the H265 format in all other cases.

Audio: You can choose to record audio or not. There are 3 audio sources that can be recorded:

o Built-in microphone

o Line in (From Line in/out Jack)

o AV in (From AV in Jack)