Camfil CITY L CONNECT 사용자 설명서 - 페이지 5

{카테고리_이름} Camfil CITY L CONNECT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Camfil CITY L CONNECT 11 페이지.

페이지 인쇄

9 TAKING INTO OPERATION

First, read the entire Technical Manual.

ONLY APPROPRIATELY QUALIFIED ELECTRICIANS MAY CARRY OUT WORK WITH ELECTRICAL

CONNECTIONS. YOU MUST BE ABLE TO TURN OFF THE POWER SUPPLY WITHOUT TOUCHING

THE UNIT. Connect the air purifier to the electrical outlet. Ensure that there is nothing obstructing

the air outlets / inlets (see figure below how to operate).

MAIN SCREEN

In the upper half of the display there is an air quality indicator.

This indicator will show "fill" or "empty" depending on the air

quality in real time. The higher the air quality, the fuller the

indicator. At the same time, the colour of the indicator will change

according to the quality.

The higher the quality the colour will change to a light turquoise

and the lower the quality the colour will change to a dark purple.

These colours correspond to the colours used on the dashboard

web page. The change of colour is produced by jumps of 5% in

quality, i.e. from 0% to 100% we have 20 defined colours.

Inside the indicator there is a text that indicates the quality range

we are in:

• Poor:

< 20%

• Fair:

< 40%

• Average: < 60%

• Good:

< 80%

• Excellent: > 80%

The text "Indoor Air Quality" is used as a title and does not change at any time.

The lower half is further divided into 3 sections. From top to bottom:

1 Environmental values: These are measures of environmental qualities over which the device

has no influence. (Humidity / Temperature / CO

measurements due to its multiple sensors.

2 Fan speed selector: It is an action button, if we press it the application takes us to the fan

speed/operation mode selection screen.

3 Button panel: This button panel has 3 buttons, from left to right:

• Schedule: when pressed, the application takes us to the schedule display/renewal screen.

• Shutdown: when pressed, the application takes us to the shutdown/reset screen.

• Settings: when pressed, the application takes you to the device settings screen.

Camfil – Clean Air Solutions

) The unit is capable of displaying these

FAN SPEED/MODE SELECTION

This screen is used to select the speed/mode in which our

fan operates. It can be called from the main screen to set the

current speed/mode or from the calendar edition to select the

programmed speed/mode.

The screen shows the following action buttons:

• Automatic: By pressing this button we indicate the system to

manage the fan speed by itself, that is, depending on the air

quality.

• From 6 to 1: We indicate to the system that the speed

management will be manual and the level at which we want

the fan to be set. Speed 6 is highly recomended for short quick

air cleaning situations.

• Off: We indicate to the application to pay the fan.

TIMETABLE

Add timetable

When we click on the timetable button and we have not yet defined

a timetable, the application displays the following screen:

This screen shows a text warning us that the team has not yet

defined a timetable and offers us an action button to add a new

one. By pressing this button, the application will take us to the

timetable editing screen.

EDITING TIMETABLE/SCHEDULE

In this screen we can configure all the aspects related to the

timetable, from top to bottom:

• Start time and end time. These selectors allow us to choose the

time at which the programmed operation of the equipment starts

and ends. To select a time, simply press the selector and drag

your finger up or down until the desired time is displayed.

• Repeat. This is an action button that takes us to the screen for

selecting the days on which our programmed operation will

take place.

• Fan speed. This is an action button that will take us to the speed/

operation mode selection screen.

• Save schedule. When we have finished configuring the 3 options

of our timetable, we can click on this button to save them. If any

of the options are not configured, the button will be disabled,

this is to avoid saving a timetable without the necessary

configurations for its operation.

Camfil – Clean Air Solutions