Camfil CITY M 사용자 설명서 - 페이지 2
{카테고리_이름} Camfil CITY M에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Camfil CITY M 11 페이지.
Camfil CITY M에 대해서도 마찬가지입니다: 사용자 설명서 (9 페이지), 기술 매뉴얼 (14 페이지)
페이지 인쇄
IMPORTANT SAFETY INSTRUCTIONS!
READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE.
Unplug from outlet when not in use and before conducting maintenance. When using an
electrical appliance, basic precautions should be observed, including the following:
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:
1.
Always connect to a polarized outlet (one slot is wider than the other). Do not modify the
polarized plug to fit a non-polarized outlet or extension cord.
2.
Read the technical manual and follow the instructions. The machine's power supply has to
be disconnected during installation, servicing, maintenance and filter replacement.
CAUTION: TURN OFF THE MACHINE AND THEN PULL OUT THE ELECTRICAL CONNEC-
TOR, ALWAYS FROM THE POWER SOURCE FIRST, WHEN WORKING ON THE PRODUCT.
THE MACHINE IS NOT TO BE REGARDED AS DE-ENERGISED UNTIL 5 MINUTES AFTER
DISCONNECTION FROM THE POWER SUPPLY.
Rotating parts do not stop immediately once power has been cut or the machine has been
switched off. ALLOW 5 MINUTES TO ELAPSE BEFORE HANDLING THE CABINET.
3.
In its standard version, this product must only be used for handling dry non-explosive
materials. If the air purifier is used for purposes other than those set out in the Technical
Manual, or is handled otherwise than set out therein, Camfil AB can accept no liability
whatsoever for the consequences of said use/handling.
4.
NOTE: Fixed installation may only be carried out by a professional with the appropriate
qualifications who takes responsibility for the installation.
The machine must NOT be used in ATEX classified areas or where explosive gases may
5.
be present at any time.
6.
The machine is provided with 4 wheels on its bottom plate so as to help positioning. Please
follow procedure set out in section 14 "Positioning" of this Technical Manual. To carry the
machine without the wheels, two (2) people are needed.
7.
All accessories, filters, spare parts, etc. used, must be approved by Camfil. Guarantee
undertakings cease to apply if the foregoing is not respected. Please contact Camfil for the
correct accessories.
8.
Do not cover inlets or outlets.
9.
Inserting objects through inlets or outlets is forbidden.
10. The unit must not be used in environments where burning / smouldering objects can get
into the machine.
11. The unit must be used indoors only.
2
Camfil - Clean Air Solutions
!
12. The unit must be used in the -25˚C - +60˚C temperature range only.
13. The unit must not be drenched with water. The highest permitted humidity is 85% if
a carbon filter is used.
14. Follow the filter handling and replacement instructions very carefully. Incorrect handling
can damage the filter medium and the guaranteed filter class will not be achieved as a
result.
15. Take great care when handling used filters. Incorrect handling can result in ill health or
sickness. Follow the instructions for filter replacement.
16. This unit can be used by children aged 8 years and above and persons with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, if they
have been given supervision or instruction concerning the safe use of the equipment and
understand the resulting dangers, Children should not play with the device. Cleaning and
user maintenance should not be performed by children without supervision.
17. To use the dashboard, the customer must connect the air cleaner to a Wi-Fi network
with Internet connectivity. It is the responsibility of the customer to connect the air
cleaner to a secure Wi-Fi network. The customer is recommended, from an information
security perspective, to connect the air cleaner to a network that is separate from the
network used for customer's core business data. The network should also filter inco-
ming and outgoing traffic to the air cleaner.For authentication in the wireless network it
is recommended to use WPA2-PSK with AES encryption.
CONTENT
1
2
Contents
3
4
5
6
7
8
9
10
11
12
Consistent standard components
13
14
15
16
17
18
19
20
21
22
23
4
5
5
5
6
6
6
7
8
12
12
12
13
13
13
14
14
14
14
15
16
16
19
3