BALTENSWEILER PIO S 사용 설명서 - 페이지 10
{카테고리_이름} BALTENSWEILER PIO S에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. BALTENSWEILER PIO S 12 페이지.
페이지 인쇄Operating instructions
DE
Do not connect the luminaire to the power supply until it has been pla-
ced and all packaging has been removed.
Switching On / Offand dimming via button on luminaire head:
1
Switching: Press the button shortly.
Dimming: Keep the button pressed (step dimming).
Important note: The luminaire must not be operated
with an external dimmer.
The magnetic contact must lie cleanly on the rod during
2
operation so that contact and consequently correct
current conduction can be ensured.
The joints have been tested and adjusted at the factory. If a
3
joint is too loose, the allen screw must be tightened from the
90° position shown.
Attention: Over-tightening can damage the joints.
8
Magnetic contac
1
Button
Correct
Incorrect
max. 90°
2
90°
90°
Do NOT over-
wind!
3
3
Control gear