BALTENSWEILER FEZ SL 조립 지침 - 페이지 2

{카테고리_이름} BALTENSWEILER FEZ SL에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. BALTENSWEILER FEZ SL 3 페이지.

페이지 인쇄
BALTENSWEILER
FEZ S / S L
1
Dismantle the transport pivot using the big allen key.
The countersunk head screw is reused at position 3 .
2
The rod has to be positioned vertically above the stud of
the base, so that the hole a in the rod and the threaded
hole are aligned. Fix the rod to the base-stud b .
3
Fix the rod by attaching the countersunk head screw.
If this screw is not tighten enough, the luminaire
starts to flicker.
4
Remove rubber ring over switch.
Contents of the package:
-
Reflector and rod
-
Base
-
Allen key small (1,5 mm)
-
Allen key big (2 mm)
-
Countersunk screw with hexagon socket
M 1185-e
LICHT UND LEUCHTEN
LUZERN
Rod
Tap hole
Stud of the base
SCHWEIZ
www.baltensweiler.ch
2 a
2
b
3
Cable depot in the base
Tel. +41 41 429 00 30
Fax +41 41 429 00 31
4
1
Transport pivot
Lucerne, 21 February 2017 / NoVe
Rod
Stud of the base