Divine Lighting Hyper 363Z 사용자 설명서 - 페이지 10

{카테고리_이름} Divine Lighting Hyper 363Z에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Divine Lighting Hyper 363Z 12 페이지.

www.divinelighting.com

Note：Only qualified professionals should attempt to service this unit!

Problem

Can not turn on the

light

DMX not functioning

Display not bright

LED's not coming on.

Some of the LED's

not coming on.

11. Troubleshooting

 Ensure the power plug is fully inserted

 Ensure the power switch for the lights is on

 Check the fuse continuity

 Check the DMX cable is connect to the lights

 Check the DMX512 controller for signal output

 Check if the lights is in DMX mode（A001）

 When initially powered，did the led flash one time? If so，the

power source is normal. If not, please check voltage switch or

voltage supply.

 Check if the power input to the IC board is normal

 Check if the cable connect to the display is loose

 Change the main board to see if it is normal.

 Change the display

 When connect to the electricity，did the led flash one time? If

so，the power source is normal. If not, please check voltage

switch or voltage supply.

 Check if the power input of the IC board is normal

 Check if the cable connect to the display loose

 Change the main board to see if it is normal.

 Change the display

 LED is connect in series first, then in parallel. Check to see if

any LED's are loose.

 Use the multimeter to check if the led is powered or not. If not,

please change the led.

 Check whether current limiting resistor is normal or not

 Check constant current IC is normal or not (compared with the

Possible Solution/Cause

Hyper 363Z v1.0