Camille Bauer KINAX N702-INOX HART 사용 설명서 - 페이지 13

{카테고리_이름} Camille Bauer KINAX N702-INOX HART에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Camille Bauer KINAX N702-INOX HART 15 페이지. Via the hart field communicator 475
Camille Bauer KINAX N702-INOX HART에 대해서도 마찬가지입니다: 사용 설명서 (19 페이지), 프로그래밍 지침 매뉴얼 (15 페이지)

페이지 인쇄

6. Mounting

All inclination transmitter can be mounted either directly

with 3 clamping brackets to the item being measured or with

a mounting plate with 4 cheese head screws M6. Please take

care that the installation position of the inclination transmitter

is perpendicular to the gravity of the earth. The inclination

transmitter are supplied standard with mounting plate but

without cheese head screws M6.

Mounting versions

7. Electric connections

The inclination sensor is connected via a highly ﬂ exible,

shielded control lead with 4 strands. The same is preassem-

bled at the factory, included in the delivery and available in

different lenghts.

Permissible cable-Ø:

conductor cross-section:

wiring connection

μC

PSU

8...33V DC

6.2 mm [0.244]

4 x 0.25 mm

Load resistor

4...20mA

• Avoid impacts or shocks on the hou-

sing.

• Do not deform housing.

• Do not open or mechanically modify the

device.

Drilling aund cut-out diagrams (for mounting transmitters)

Ø66,2

[2.606]

60,1

2.366

• Do not electricly modify the device nor

carry out any wiring work when energised.

• Do not plug in or unplug electric connection

when energised.

White (wt) = +24V

Brown (br) = 4...20 mA

Green (gn) = 100%

Yellow (ye) = 0%