esera automation Windmill Pro 200 사용자 설명서 - 페이지 2
{카테고리_이름} esera automation Windmill Pro 200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. esera automation Windmill Pro 200 4 페이지. With pulse output and heating
페이지 인쇄
2
Technical data
Measuring range
Output signal Sensor
Electrical data
Connecting cables
Evaluation
Dimensions
Accessories
Scope of delivery
3
Ambient conditions
Protection system:
Protection class:
Temperature,Operation: -40°C to +125°C
4
Conformity
EN 50090-2-2, EN 61000-4-2 ESD, EN 61000-4-3 HF, EN 61000-4-4 Burst, EN 61000-4-5 Surge,
EN 61000-6-1 Interference immunity, EN 61000-6-3 Interference radiation, RoHS
5
Wiring diagram
The connection cable has numbers printed on it. The assignment of the number cable is:
1 + 2 Pulse output
3 + 4 Heater 24V AC/DC +/-10% approx. 60mA
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA-Automation or E-Service GmbH. Errors and technical modification subject to change. ESERA-Automation, E-Service GmbH 2019
www.esera.de
0 - 50m/s
4 pulses / 1 m/s
- Heating: 24 V AC or DC ca. 25mA
- Pulse output (normally open contact) max. 24VAC/DC 10mA
ca. 3m cable, 4-strands
Pulse output for 1-Wire S0 counter 11211
ca. 210 mm x 80mm (height x width)
Windmill Ø 160 mm
Mast bracket, wall bracket, mast for flat roof
Windsensor without mounting bracket
IP65
III
20020 V1.0 R1.0 Manual
Page 2 of 4