DivioTec NFF271 사용자 설명서 - 페이지 9

{카테고리_이름} DivioTec NFF271에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DivioTec NFF271 20 페이지. Hyper mini fisheye ip camera

Camera Cabling

Please follow the instructions below to complete the cable connections.

2.1

For power connection, please refer to section

for the indoor models, and see section

the outdoor models. Alternatively, users can power the camera by PoE if a

Power Sourcing Equipment (PSE) switch is available. Refer to the section below

for Ethernet cable connection.

2.2

To have best transmission quality, cable length shall not exceed 100 meters.

Connect one end of the Ethernet cable to the RJ-45 connector of the camera,

and plug the other end of the cable to the network switch or PC.

Check the status of the link indicator and the activity indicator LEDs. If the LEDs

are unlit, please check the LAN connection.

NOTE: If PoE is used, make sure PSE is in used in the network.

NOTE: In some cases, Ethernet crossover cable might be needed when

connecting the camera directly to the PC.

Green Link Light indicates good network connection.

Orange Activity Light flashes for network activity indication.

Connectors (Camera without IP66)

Function Cables (Camera with IP66)

for