Akitio MyCloud Duo 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Akitio MyCloud Duo에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Akitio MyCloud Duo 3 페이지.
Akitio MyCloud Duo에 대해서도 마찬가지입니다: 매뉴얼 (4 페이지)

Last update: 2015/03/25 14:02

Big LED

Small LED

Flashing orange HDD access

Rear View

Power button

DC 12V

Power receptacle

USB 2.0 host port

eSATA

eSATA host port

10/100/10000 Gigabit Ethernet port

Reset

System reset button

To reset the conﬁgurations (e.g. admin password and network settings), make sure the

power is ON and the system is running. Press and hold the reset button for 5-10

seconds and then release it. Wait until the system LED stops ﬂashing before

attempting to login again.

To reset the device back to factory default, press and hold the reset button for 12

seconds and then release it. After the reset, it will be necessary to

the HOME and SWAP

can still be accessed by the admin, it will be necessary to recreate the previous user

accounts before the users can login again and access their existing data.

Power ON/OFF Procedure

Connect the power supply to your device ﬁrst and only then plug it into the wall outlet. The system

starts up automatically as soon as you plug in the power supply. It takes about 1-2 minutes for the

device to go online but the blue system LED will indicate when the system is ready.

To safely turn oﬀ the device, press and hold the power button for about 4 seconds until the red LED

starts ﬂashing. The system will then shut down all services and about 20 seconds later, it will power

down.

If for some reason the system is unresponsive, press and hold the power button for 6 seconds to

forcefully shut down the system and cut oﬀ the power.

http://wiki.myakitio.com/

mycloud_one

partition. Also, even though the private ﬁles of the other users

http://wiki.myakitio.com/mycloud_one

manually mount

Printed on 2020/11/30 23:29