Akitio MyCloud Pro 매뉴얼 - 페이지 3

{카테고리_이름} Akitio MyCloud Pro에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Akitio MyCloud Pro 5 페이지.

2020/03/09 19:16

DC 12V Power receptacle (DC +12V/5A)

USB 3.0 host port

Gigabit Ethernet port

Reset

System reset button

To reset the conﬁgurations (e.g. admin password and network settings), make sure the

power is ON and the system is running. Press and hold the reset button for 5-10

seconds and then release it. Wait until the system LED stops ﬂashing before

attempting to login again.

To reset the device back to factory default, press and hold the reset button for 12

seconds and then release it. After the reset, it will be necessary to

the HOME and SWAP

can still be accessed by the admin, it will be necessary to recreate the previous user

accounts before the users can login again and access their existing data.

The fan starts when the CPU temperature reaches 70ºC or the disk temperature

reaches 55ºC. It stops when the temperature of both the CPU and the disk drops below

45ºC.

Power ON/OFF Procedure

Connect the power supply to your device ﬁrst and only then plug it into the wall socket. To turn on the

device, press the power switch to start up the system. It takes about 1-2 minutes for the device to go

online. The green system LED (OS) indicates when the system is ready.

MyAkitio Wiki - http://wiki.myakitio.com/

partition. Also, even though the private ﬁles of the other users

3/5

MyCloud Pro

manually mount