esera automation 19200 사용자 설명서 - 페이지 4
{카테고리_이름} esera automation 19200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. esera automation 19200 10 페이지. W/auto-e-connect
페이지 인쇄
6
Conformity
EN 50090-2-2
EN 61000-4-2, ESD
EN 61000-4-3, HF
EN 61000-4-4, Burst
EN 61000-4-5, Surge
EN 61000-6-1, Fault-free operation
EN 61000-6-3, Stray radiation
RoHS
7
Block diagram
8
LED display
The ESERA-Station 200 has various display LEDs. Please refer to the following table for their functions:
LED Status
Embedded Computer
LED green front
LED green front
LED green Ethernet
LED green Ethernet
1-Wire Gateway
LED green
LED green
LED green
LED green
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH, ESERA-Automation 2020
www.esera.de
Description
Function
PWR
Display supply voltage Embedded Computer
DATA
LED, can be programmed for individual use (GPIO 27)
DATA
Flashes while transferring data
LINK
Is lit if Ethernet connection is active
PWR
Display supply voltage 1-Wire Gateway
DATA
REL1
Output 1, is lit when relay 1 is active
REL2
Output 2, is lit when relay 1 is active
19200 V2.0 R1.0 Manual
LED flashes 3 times after power on
Flashes at 1-Wire activity
Flashes while transferring data by the data interface
Flashes rapidly if "KAL Receive" has been activated no
"KAL messages" received.
Page 4 of 10