esera automation ESERA-Station 200 사용자 설명서 - 페이지 5

{카테고리_이름} esera automation ESERA-Station 200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. esera automation ESERA-Station 200 10 페이지. W/auto-e-connect
esera automation ESERA-Station 200에 대해서도 마찬가지입니다: 매뉴얼 (9 페이지), 사용자 설명서 (5 페이지)

페이지 인쇄
esera automation ESERA-Station 200 사용자 설명서
Art. No. 19200
9
Connection
Module top side (left to right)
 Supply voltage 16-30VDC
 USB Slave for 1-Wire Gateway
Configuration and firmware
update/upgrade
 Optional input (not equipped)
 2 x digital input 10-30VDC isolated
Module bottom side (left to right)
lower level
 1-Wire bus output, Masse/GND, Data,
5V (max. 1A) and 12V (max. 1,2A)
 Reset button for 1-Wire Gateway (inside)
 Digital output 1 (max. 16A)
 Digital output 2 (max. 16A)
upper level
3 x USB output (5V max. 0,5A)
 Ethernet input RJ45
10/100/1000 MBit
Note: Basics and tips for 1-Wire bus systems can be found in our webshop
grundlagen/) or in our e-book which is also available in our webshop
support/dokumentation/352/grundlagen-1-wire-bus-ebook?number=11901).
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH, ESERA-Automation 2020
www.esera.de
19200 V2.0 R1.0 Manual
(https://www.esera.de/1-wire-
(https://www.esera.de/service-
Page 5 of 10