3DUpFitters Taz6 Enclosure Kit 설치 매뉴얼 - 페이지 7

{카테고리_이름} 3DUpFitters Taz6 Enclosure Kit에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3DUpFitters Taz6 Enclosure Kit 15 페이지.

1. Identify the Corner Connectors

Each corner of the enclosure will be held together by the connectors pictured below. There are only two

versions, L and R, which can be identiﬁed by the letters stamped on the inside. The opposite

connectors are identical, i.e., the Bottom Right is the same as Top Left. In all cases, the surface of the

connector with the cutout pattern faces front or back.

Top Left

Bottom Left

2. Attach The Door Frame Corners 

The front door is designed so that the latches are on the left. Attach the door

connectors on the backside of the door frame using the provided cap head 14mm

screws. See the photos below. The top of the connector should be ﬂush with the

acrylic top.

Top Right

Bottom Right