Divitec HDG-T3x0 Series 빠른 설치 매뉴얼

{카테고리_이름} Divitec HDG-T3x0 Series에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Divitec HDG-T3x0 Series 9 페이지.

1. Description

This manual applies to the HDG-3x0 series network camera.

The Network Camera supports the network service for a sensor image with progressive scan, which

can be monitored on a real-time screen regardless of distances and locations. By using its dedicated

program, many users are able to have an access to the Network Camera at once or a single user can

monitor various network cameras at the same time. It also enables users to play, store and retrieve a

monitoring image by using a PC. All the settings and real-time monitoring screens are also provided

through an access to the web.

The Network Camera is fully featured for security surveillance and remote monitoring needs. It is

based on the DSP compression chip, and makes it available on the network as real-time, full frame

rate Motion JPEG and H.264 (or MPEG-4) video streams.

The alarm input and alarm output can be used to connect various third party devices, such as, door

sensors and alarm bells.

•

Installation Steps

Follow these steps to install the Network Transmitter on your local network (LAN):

1. Check the package contents against the list below.

2. Connect the Network Camera. See page 3.

3. Set an IP address. See page 4.

4. Set the password. See page 6.

•

Package Component

The system comes with the following components:

Network Camera unit

Template Sheet

•

Contents in the installation CD

1. The Network Camera User's Manual

2. The NautilusClient16 User's Manual

3. The Nautilus Server User's Manual

4. The NautilusClient16 Installation software

5. The Nautilus Server Installation software

Note: Check your package to make sure that you received the complete system, including all

components shown above.

HDG-T3x0 Series, Quick Installation Guide

Installation CD

Installation Guide

Accessory Kit