Clearfield FieldSmart 48 설치 매뉴얼 - 페이지 16

{카테고리_이름} Clearfield FieldSmart 48에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clearfield FieldSmart 48 18 페이지. Fiber distribution point (fdp) port outdoor wall box

페이지 인쇄

FieldSmart

24 & 48 Port Outdoor Wall Box

Installation Manual

Cleaning an MPO/MTP Connector

Female Connector

•

Place one wiping paper on QbE-2 FiberSafe™ Cleaning Platen and

apply small amount of precision cleaner (about 1" in diameter) with

Electro-Wash MX pen on to one end of the wipe. (Figure 1)

•

Hold end face at a 90 degree angle. For APC connection, adjust by

slightly tilting the container or end face. Angle is correct when no drag is

felt on the end face. (Figure 2)

Male Connector

•

Lightly moisten one side of the fiber optic swab (CC505F) by spotting a

small amount (about 1") of Electro-Wash PX or Electro-Wash MX pen

onto the QbE. Hold the swab, 1 side down to the wetted area and hold

for a count of 1-2-3-4-5.

•

Place swab, wet side down, at one end of connector end face and draw

across in a diagonal sweep; i.e., from fiber 1 up and across to fiber 12.

Turn swab over to dry and draw back from fiber 12 to fiber 1. (Figure 3)

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected]

Fiber Distribution Point (FDP)

______________________________________________________

Manual 020012 REV A - Aug 2018

Figure 1

Figure 2

Figure 3