ESI Dr. DAC prime 사용자 설명서 - 페이지 6

{카테고리_이름} ESI Dr. DAC prime에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ESI Dr. DAC prime 12 페이지. High quality 192khz dac with usb audio interface

ESI

Dr. DAC prime

3.1.1 Installation & Connection

Dr. DAC prime is simply connected to an available USB port of your computer. The supplied USB

cable connects to the USB connector on the back panel of Dr. DAC prime. The other end of the

cable is plugged it into your computer.

USB port of a computer

After the connection of Dr. DAC prime, the operating system automatically detects it as a new

hardware device. Modern operating systems like Windows XP, Vista/7 or Mac OS X usually detect

the hardware directly and are installing the correct USB audio drivers automatically. You can use

Dr. DAC prime instantly now.

Disconnect Dr. DAC prime before you install the driver if it has been connected already. Then

launch setup.exe from the Windows folder of the included Installation CD or from a download of a

recent driver from our website.

You will now see a dialog as shown on the left picture below. Click Next. You can define the target

directory for the installation now. Confirm it with Next.

The installer now informs you that the driver installation will start as shown on the left picture

below. Confirm this with Next. During the following process you will see a dialog box once or

several times that informs you that the driver software has not passed Windows Logo testing. Please

be assured that our drivers have been tested in various different ways and are OK to be used.

Confirm any such dialog with Continue Anyway.