ESI ES2247B 사용자 지침 - 페이지 15

{카테고리_이름} ESI ES2247B에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. ESI ES2247B 20 페이지. 2 channel multi-purpose programmer
ESI ES2247B에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (16 페이지)

페이지 인쇄
ESI ES2247B 사용자 지침

The +HR Boost Function

The +HR function allows the user to have up to 3 hours of
extra Central Heating or Hot Water, without having to change
the programme.
N.B. The +HR function is only available when the programme
is in AUTO, ALL DAY or OFF operating modes and the
slider must be switched to RUN. If the programmer is in
AUTO or ALL DAY mode when the +HR button is pressed
and the resulting time of the boost overlaps a START/ON
time, the boost will disengage.
To +HR Boost Central Heating
1. Press the Next
Press the +HR button.
2. One press of the button will give one extra hour of
Central Heating; two presses of the button will give two
extra hours; three presses of the button will give the
maximum three extra hours. Pressing it again will switch
off the +HR function.
3. The +1HR, +2HR or +3HR status will appear on the right
hand side of the radiator symbol.
To +HR Boost Hot Water
1. Press the Next
displayed. Press the +HR button.
2. One press of the button will give one extra hour of
Hot Water; two presses of the button will give two
extra hours; three presses of the button will give the
maximum three extra hours. Pressing it again will switch
off the +HR function.
3. The +1HR, +2HR or +3HR status will appear on the right
hand side of the tap symbol.
until the radiator symbol is displayed.
button until the tap symbol is
15