ESI ESRTM 사용자 지침 - 페이지 4

{카테고리_이름} ESI ESRTM에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. ESI ESRTM 8 페이지. Mechanical room thermostat
ESI ESRTM에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (12 페이지)

What is a Mechanical Room

Thermostat?

An explanation for householders

A room thermostat simply switches the heating system on

and off based on room temperature. It works by sensing

the air temperature, switching on the heating when the air

temperature falls below the thermostat setting and switching

it off once this set temperature has been reached.

Turning a room thermostat to a higher setting will not make

the room heat up any faster. How quickly the room heats up

depends on the design of the heating system, for example,

the size of the boiler and radiators. Neither does the setting

affect how quickly the room cools down.

Turning a room thermostat to a lower setting will result in

the room being controlled at a lower temperature, and saves

energy. The heating system will not work if a time switch or

programmer has switched it off. The house insulation quality

is a key factor in heating control. The way to set and use your

room thermostat is to find the lowest temperature setting that

you are comfortable with, and then leave it alone to do its

job. The best way to do this is to set the room thermostat to a

low temperature – say 18°C and then turn it up until you are

comfortable with the temperature (20°C is the usual preferred

set point). You won't have to adjust the thermostat further.

Any adjustment above this setting will waste energy and cost

you more money.

If your heating system is a boiler with radiators, there will

usually be only one room thermsotat to control the whole

house (but building regulations Part L require houses above