ESI ESRTP5 설치 지침 매뉴얼 - 페이지 8

{카테고리_이름} ESI ESRTP5에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ESI ESRTP5 18 페이지. Programmable room thermostat
ESI ESRTP5에 대해서도 마찬가지입니다: 사용자 지침 (20 페이지)

페이지 인쇄

2. Installation

Installation Safety Instructions

2.1.1

The unit must be installed by a suitably qualified person in

accordance with the latest IEE Wiring Regulations. Isolate

mains supply before commencing installation. Please read all

instructions before proceeding.

Ensure that the fixed wiring connections to the mains supply is

via a fuse rated at not more than 3 Amps and Class 'A' switch

having a contact separation of a minimum of 3mm in all poles.

The recommended cable sizes are 1.0mm sqr or 1.5mm sqr. No

earth connection is required as the product is double insulated

but ensure continuity of earth throughout the system.

General Safety Instructions

2.1.2

This product complies with the essential requirements of the

following EC Directives:

• Electro-Magnetic Compatibility Directive 2014/30/EU.

• Low Voltage Directive 2014/35/EU.

• EC Marking Directive 2014/30/EU.

Please leave the user instructions with the end user where they

should be kept in a safe place for future reference.

Warning Notices

2.1.3

WARNING: Always isolate the ac mains supply before

installing. This product must be fitted by a competent

person, and installation must comply with the guidance

provided in the current editions of BS767 (IEE wiring

regulations) and part "P" of the building regulations.