ESI Amber i1 사용자 설명서 - 페이지 8

{카테고리_이름} ESI Amber i1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ESI Amber i1 16 페이지. Audio interface with 24-bit / 192 khz
ESI Amber i1에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (3 페이지)

페이지 인쇄

ESI

Amber i1

3. Windows Control Panel

This chapter describes the Amber i1 Control Panel and its functions under Windows. To open the

control panel double click on the orange ESI icon in the task notification area. The following dialog

will appear:

The File menu provides an option called Always on Top that makes sure the Control Panel stays

visible even when working in other software and you can launch the Windows Audio Settings there.

The Config menu allows you to load the Factory Defaults for the panel and driver parameters and

you can select the Sample rate there as well (as long as no audio is being played back or recorded).

As Amber i1 is a digital audio interface, all applications and audio data will be processed with the

same sample rate at a given time. The hardware natively supports rates between 44.1 kHz and 192

kHz.

The Help > About entry shows current version information.

The main dialog has two sections:

INPUT

This section allows you to select the input source used for recording: LINE (= line input on the

backside), MIC (= microphone input), HI-Z (= guitar / instrument input) or MIC/HI-Z (= microphone

input on left channel and guitar / instrument input on right channel). Next to it the input level is shown

as a level meter. The 48V switch next to MIC allows you to enable the phantom power for the

microphone input.

OUTPUT

This section contains volume control sliders and signal level meters for the two playback channels.

Under it there is button that allows you to MUTE playback and there are playback level values

displayed for each channel in dB.

To control both left and right channels simultaneously (stereo), you need to move the mouse pointer

in the middle between the two faders. Click directly on each fader to change channels independently.