ESI EPPA2-KIT 사용 설명서 - 페이지 8
{카테고리_이름} ESI EPPA2-KIT에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ESI EPPA2-KIT 12 페이지. Dual monitor arm conversion
페이지 인쇄
EPPA2-KIT
Grommet Method
This method can be used for worksurfaces that have a grommet hole in
an appropriate position. First, the grommet bolt and grommet mount plate
are assembled to the base. Then, with the base assembly placed over the
grommet hole, the grommet bar and grommet knob are used to secure
the base assembly in position.
1. With the countersunk holes on the bottom, insert the grommet bolt through
the top of the grommet mount plate. Attach the plate to the underside of
the base using the three M6x12 flat head screws and the 4mm Allen key.
2. Peel the adhesive backing from the clamp pad and attach the pad to the
base and grommet mount plate.
1.
Grommet
Mount Plate
4mm
Allen Key
Install Base Assembly
• Place the base assembly over the grommet hole, with the bolt centered.
• Place the grommet bar onto the grommet bolt and then screw on the grommet knob. Tighten the
grommet knob securely to hold the base assembly in position.
• Proceed to "Monitor Installation" on page 9.
8
M6x12
Flat Head
Grommet Bolt
Center Over
Grommet Hole
DUAL ARM BASE ASSEMBLY INSTALLATION
Clamp
Method
2.
Grommet Bar
Grommet Knob
Grommet
Method
Clamp
Pad
Tighten Knob
to Secure