ESI 2TD-C48-24-SLV 조립 지침 매뉴얼 - 페이지 7

{카테고리_이름} ESI 2TD-C48-24-SLV에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ESI 2TD-C48-24-SLV 12 페이지.

Trada 2-leg

Assembly

Step #7: screw side brackets to worksurface

• Align the rear of the feet with the rear edge of the table

• Double-check that the frame is centered side-to-side.

• Screw the side brackets to the table using two #10x1" wood screws per bracket.

align rear of foot

with rear of table

#10x1"

Phillips pan head

Step #8: screw crossbars to worksurface

• Screw the crossbars to the table using from two to five #10x2½" wood screws per crossbar.

— Use all available crossbar-to-worksurface holes. The number of these holes depends on how much the

crossbars were expanded in step #5. In the example below, two screws per crossbar are used.

#10x2½"

Phillips pan head

Page 7