ESI 3V-LX-C4848-30 Series 사용 설명서 - 페이지 6
{카테고리_이름} ESI 3V-LX-C4848-30 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ESI 3V-LX-C4848-30 Series 12 페이지. Victory-lx 3 leg electric table base
페이지 인쇄VICTORY-LX 3 LEG ELECTRIC TABLE BASE
STEP 9
Adjust the position of the frame before attaching it to the table.
• Check that the top supports on each side are approximately 1" (25mm) from the ends of the table.
• The rear of the feet should align with the rear of the table. With feet for a 24" deep table, the rear cross
channels will be 6½" from the rear of the table. With feet for a 30" deep table, the rear cross channels will
be 9½" from the rear of the table.
STEP 10
Attach all three top supports to the table.
• Use the M6x20 Phillips round head screws (12 total
required).
•
supports.
STEP 11
Use the 5mm Allen key to tighten the set screws (16
total) in all four cross channels.
5
6½" with 24" Table
9½" with 30" Table
Align Rear of Feet
with Rear of Table
90°
1"
M6x20
Tighten All
16 Set Screws
ASSEMBLY
120°
Top Supports
5mm
Allen Key