ClearlyIP CIP280v2 빠른 참조 매뉴얼

{카테고리_이름} ClearlyIP CIP280v2에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearlyIP CIP280v2 2 페이지.

페이지 인쇄

Hardware Overview

Status

Indicator

Camera

LED

Status Indicator: Steady green when power on, blinking red when the

phone is ringing (can be customized).

Place a call

Three ways to make a call:

Handset: Pick up the handset; enter the number, then press'-or press #.

Speaker: Press

◄®;

enter the number, then press the send key or

press#.

Headset: Press

C>,

enter the number, then press'-or press #.

You can also use Contacts or call log to dial the number you want,

press dial key and place the call by the three ways mentioned. More,

you can also alternate the mode during the call.

Answer a call

Handset: Pick up the handset.

Speaker: Press

◄~-

Headset: Press ()_

Call Conference

Assuming that A and Bare in conversation. A wants to bring C (or D & E) in a

conference:

1) A presses

JI&., the call is placed on hold.

2) A enters the number of C and then presses \.or

C answers the call.

3) A presses

JI&., then A, B and Care now in a conference.

4) If add D&E, A presses II, the current conference is on hold, presses

J.• and dials D, D answers the call. A presses II and

and dials E, E

answers the call. A presses

JI&., then A, B, C, D, E are in conference.

Note:

1) If C does not answer the call, A can back to continue the

conversation with B;

2) Once A hangs up the call, the conference is ended, while if B or C

drops the call, A&C or A&B conversation continues.

Call Mute

Press

to mute the microphone during the call.

Press

again to un-mute the conversation.

Instruction

Configuration

Configuration via Phone

1) Press Setting ---. Advanced (Default password: admin)

2) Select Network: To configure the WAN Port (DHCP/Static), PC Port etc.

3) Select Accounts: Enable the account; fill in the SIP Server, Outbound

Proxy and the SIP Registration information.

Note: You can also reject the call by press -

End a call

To end a call in three different modes:

Handset: Hang up the handset or press -

Speaker: Press

◄®,

or press the cancel key.

Headset: Press-

Redial

Press 8 to redial the last call that dialed.

Hold

Press

c;J.,

or tap II during a call to hold the call.

Press

c;J.,

or tap

►

to resume the call.

Call Transfer

Blind Transfer

Firstly, press

H or tap~ during the conversation, the call is on hold now.

Secondly, enter the number you want to transfer to and press ,~, or'-.

Select transfer mode as blind transfer. At this time, the previous call is

ended, and the blind transfer is completed.

Attend Transfer

Firstly, press H or tap~ during the conversation, the call is on hold now.

Secondly, enter the number you want to transfer to and tap'-.Select transfer

mode as Attend transfer. At this time, the previous call has not ended and is

on hold. After the transfer object picks up the call, press ,~, or tap~ again.

At this time, the call is transferred to the transfer object, and the attend

transfer is completed.

Semi-Attend Transfer

Firstly, press H or tap~ during the conversation, the call is on hold now.

Secondly, enter the number you want to transfer to and tap'-.Select transfer

mode as Attend transfer. At this time, the previous call has not ended and is

on hold. Before the transfer object picks up the call, press H or tap~ again.

At this time, the call is transferred to the transfer object, and the semi-attend

transfer is completed.

Configuration via Web

1) Get the IP address from the phone: Press Setting-Status-Information.

2) Login: Input the IP address in the web browser. The PC and phone should

be in the same IP address segment (Login name: admin; Default password:

admin).

3) Configuration: Fill in the SIP Server info on the Profile page and the

Account registration info on the Account page.

4) Click on Save Set and Restart the Phone if needed.

Bluetooth

The Model connects to a wide range of Bluetooth Headset, compatible with

Bluetooth specification V4.2 and backwards compatible with 1.1, 1.2, 2.0

and 3.0.

How to enable headset mode?

1) Find Menu then navigate as follows:

Settings-> Basic Settings-> Headset

2) Enable the Headset priority.

3) Choose the

"Ringer

Device" from

"Use

Headset",

"Speaker

& Headset"

option

4) Press the save button to save the configuration.

5) Press the headset key on phone's during the idle status when you

accomplish the above mentioned configuration. Headset icon will display on

phone status bar

How to activate Bluetooth via phone interface?

1) Find Menu then navigate as follows: Settings-Basic-Connected

devices

2) Select Connection Preference-Bluetooth,

press to turn on.

How to scan the Bluetooth headset device on phone interface?

1) Find Menu then navigate as follows:

Settings-Basic-Connected

devices ->Pair new device

2) The phone will enter the scan interface, the phone starts searching for

Bluetooth headsets within the working range.

3) All detected Bluetooth headsets will display on the phone.

4) Choose the desired Bluetooth Device from the list and connect to it:

5) When you back to idle interface, you will see the connected successfully

icon.

6) If you want to disconnect with this Bluetooth device, you can press the

Settings button, then press the

"Disconnect"

button.